|
Страница 1 из 1
|
[ 1 сообщение ] |
|
Zoho ManageEngine OpManager Professional v10.1.10100 x86 x64 (2013, EN)
Автор |
Сообщение |
nickson
Релизер
Раздал: 11.61 ГБ
Скачал: 5.23 ГБ
Ратио: 2.220
Зарегистрирован: 2013-08-14 23:40 Сообщения: 5464
|
ZOHO ManageEngine OpManager Pro #777 Год выпуска: 2013 Версия: v10.1.10100 Разработчик: ZOHO Corp.Платформа: Windows: 2003 Server, Vista, 2000 professional +SP4, XP Professional, W7 x86-x64 Совместимость с W7: да Системные требования: Interfaces|Processor|RAM|Hard Disk| Up to 50 devices or 300 interfaces|1.7 GHz| 1GB| 40 GB| Up to 300 devices or 2000 interfaces| 3.4 GHz| 2GB| Up to 1000 devices or 5000 interfaces|2 * 3.4 GHz| 4GB| 80 GB| More than 1000 devices or 5000 interfaces|4 * 3.4 GHz|8GB| Язык интерфейса: Английский, Испанский, Китайскийl, Японский, Немецкий. Таблэтка: Присутствует Описание: ManageEngine OpManager – это доступное, удобное при установке и в использовании, сетевое, системное, контролирующее приложения программное обеспечение. Это реальная альтернатива дорогим, большим и сложным системам сетевого управления, которые предлагает нам рынок. - Специализированный функциональный контроль сервера, маршрутизатора, переключателя и принтера - Превосходная программа для управления и устранения ошибок - Встроенные графики и отчеты для центрального процессора, памяти, диска, и статистики интерфейса Особенности:- Всесторонний контроль маршрутизатора и переключателя - Контроль сервера и услуг - Контроль принтера - Интеллектуальная служба контроля событий Event Alarm - Извещения через электронную почту и смс - Оператор отмечает предупреждения об опасности, предотвращение опасности, повышение опасности, и многое другое - Контроль центрального процессора, памяти и диска, а также пропускной способности и интерфейса - Встроенные графики и отчеты (можно экспортировать в формат HTML, PDF, JPG) - Web Client и Remote Client – усовершенствованная функциональность - Работает с Windows, Linux и Solaris ManageEngine OpManager – это укомплектованное программное обеспечение для сетевого контроля. Оно предоставляет комбинацию из контроля WAN, сервера и приложений со встроенной панелью помощи, управления ресурсами и анализом сетевого трафика. Программа автоматизирует выполнение некоторых задач по сетевому контролю, так что представление о нем как о сложном процессе оказывается неверным. Профессиональная версия. ManageEngine OpManager Professional Edition предназначена для контроля неограниченного количества приборов. Подходит для малого и среднего бизнеса. добавлен: UP до 10100; версия для Linux; АДоны;
ManageEngine OpManager v10.1 – Build No. 10100
May 7th, 2013 New Features With OpManager's new 3D Data Center Builder, you can virtually create an exact model of your racks and data centers. You can embed these datacenter designs on your NOC screens and monitor them 24x7 from anywhere, anytime. The 3D data center can also be viewed from iPad and other tablets. A high productive, ultra-fast, responsive, API driven new UI is ready to use. Built completely on a new JavaScript framework it offers you 10x more productivity than the previous one. You can now avail APM plugin in OpManager central webclient also. Previously the plugin was available only in the standalone version. Now you can make you of APC PDU (Series 7800/ 7830 / 8841/8858 / 8858NA3) templates which are newly added to list of OpManager device templates. With the help of these templates, you can monitor parameters such as PDU Phases, PDU Power/Phase Load, PDU Voltage, PDU Bank Load & many more Bug Fixes Customer Issues Fixed: Build 10100 • If any interface has Null as its IP address the interfaces are not discovered properly and then error page shown when you click on Interfaces tab (Issue ID 94414 ) • SNMP v1/v3 devices responds partially to SNMP v2 and thus throws error when parsing the SNMP response during shallow discovery. (Issue ID 94390 ) • Discovery fails if device display name contains special characters, is fixed (Issue ID 94375 ) • Monitors ,Notification Profiles, Interface Tab doesn't show for Netapp Devices is corrected (Issue ID 4554403 ) • NCM fails to connect in https mode is fixed • Issue in viewing the Business view if any interface traffic is null is fixed • At times, Netapp Storage devices is not categorized correctly is resolved • Trap OID Contains matching fails in during SNMP Trap Processoring is rectified • OutofMemory error due to Layer 2 polling is fixed • Events Summary widget display the event type as Null for the UPS specific alarms is fixed (Issue ID 94206 ) • Unable to view the alarm escalation due to stray entries in the database is fixed (Issue ID 4554674) • WMI Monitors will be shown only if the device type name contains 'WIN' is corrected. Hereafter its based on the vendor type • Extra slash added in the credential settings page while updating the credentials is fixed • If multiple statsdata hourly table is created in a particular day, then all the tables are not considered for the daily table archiving. This is fixed now (Issue ID 4552226 ) • Unable to start OpManager (enterprise edtion) in Windows XP is fixed • Database restoration fails from mysql to postgres database is fixed now • In linux script execution, if cli fails the script exits unexpectedly(due to some error), then is not opened again (Issue ID 4535355 ) • Workflow logs are now filtered based on workflow id (Issue ID 4560985 ) • Check URL & HTTP Post Data\Result tasks execution failed in WorkFlow is fixed (Issue ID 94366) • Time format if configured for 24 hrs in system settings was not reflected in the client (Issue ID 94235 ) • Unable to view the subtabs in Chrome version 6 is fixed (issue ID 94290 ) • Option to configure the length of alarm message is provided. This will be reflected in the Alarms page and in all alarm specific widgets (Issue ID 92020 ) • Bcp.exe and bcp.rll files are copied correctly now in MSSQL Express edition builds (Issue ID 94216 ) • autocomplete off done for username and password fields • Incorrect values shown for CPU Utilization - Top 3 Process list. This is corrected now. • Process Monitor data collection fails for CLI protocol is fixed • Space in credential name leads to Access Denied error message in Add New Process Template page. This is fixed now • Technician name filtering in alarm page now works correctly for pgsql and mysql databases • Provision to add the AD user in API is supported now • Database disconnection at times occurs, which is due to frequent query which is triggered to check the user permission level. This is fixed now • Incorrect received syslog has unknown string as host name, now host name taken from packet (Issue ID 4567408) • Device template will not be applied, if "Show All Devices" option selected. This is fixed (Issue ID 94456 ) • Host snap shot page now shows the Orphaned vm's
Раздачи ZOHO ManageEngine
У вас нет необходимых прав для просмотра вложений в этом сообщении.
|
2013-10-19 21:53 |
|
|
|
Страница 1 из 1
|
[ 1 сообщение ] |
|
Кто сейчас на конференции |
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2 |
|
Вы не можете начинать темы Вы не можете отвечать на сообщения Вы не можете редактировать свои сообщения Вы не можете удалять свои сообщения Вы не можете добавлять вложения
|
|